|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Type: | Hall Type |
| Output Signal Type: | Analog Output |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Electrical data:(Ta=25ºC,Vc= ±15VDC) | |||||||||
| Ref Parameter |
CHB100LAE 15D100M | CHB200LAE 15D100M | CHB300LAE 15D150M | CHB300LAE 15D100M | CHB300LAE 15D60M | CHB400LAE 15D100M | CHB500LAE 15D250M | ||
| Rated input Ipn(A) | 100 | 200 | 300 | 300 | 300 | 400 | 500 | ||
| Measuring range Ip(A) | 0~±350 | 0~±600 | 0~±600 | 0~±700 | 0~±700 | 0~±700 | 0~±700 | ||
| Turns ratio Np/NS (T) | 1:1000 | 1:2000 | 1:2000 | 1:3000 | 1:5000 | 1:4000 | 1:2000 | ||
| Output current rms IS(mA) | ±100*IP/IPN | ±100*IP/IPN | ±150*IP/IPN | ±100*IP/IPN | ±60*IP/IPN | ±100*IP/IPN | ±250*IP/IPN | ||
| Secondary coil resistance RS (Ω) | 10 | 18 | 18 | 40 | 88 | 60 | 33 | ||
| Inside resistance RM (Ω) | [(VC-0.5V)/(IS*0.001)]-RS | ||||||||
| Supply voltage VC(V) | (±15~±24) ±5% | ||||||||
| Accuracy XG(%) | @IPN'T=25°C < ±0.5 | ||||||||
| Offset current IOE(mA) | @IP=0,T=25°C < ±0.2 | ||||||||
| Temperature variation of IOE IOT(mA/°C) | @IP=0,-40 ~ +85°C < ±0.5 | ||||||||
| Linearity error εr(%FS) | < 0.1 | ||||||||
| Di/dt accurately followed (A/µs) | > 100 | ||||||||
| Response time tra(µs) | @90% of IPN < 1.0 | ||||||||
| Power consumption IC(mA) | 25+Is | ||||||||
| Bandwidth BW(KHZ) | @-3dB,IPN DC-100 | ||||||||
| Insulation voltage Vd(KV) | @50/60Hz, 1min,AC 5.5 | ||||||||
| General data: | |||||||||
| Parameter | Value | ||||||||
| Operating temperature TA(°C) | -40 ~ +85 | ||||||||
| Storage temperature TS(°C ) | -55~ +125 | ||||||||
| Mass M(g ) | 130 | ||||||||
| Plastic material | PBT G30/G15, UL94- V0; | ||||||||
| Standards | IEC60950-1:2001 | ||||||||
| EN50178:1998 | |||||||||
| SJ20790-2000 | |||||||||
| Dimensions(mm): | |||||||||
|
Connection | ||||||||
|
|||||||||
| General tolerance | |||||||||
| General tolerance:< ±0.5mm Primary through-hole:13*30±0.15mm Secondary pin: MOLEX 70543-0003 Mating connector: MOLEX 5057-9404 |
|||||||||
| Remarks: | |||||||||
| * When the current goes through the primary pin of a sensor, the voltage will be measured at the output end. * Custom design is available for the different rated input current and the output voltage. * The dynamic performance is the best when the primary hole if fully filled with. * The primary conductor should be <100°C. |
|||||||||
| WARNING : Incorrect wiring may cause damage to the sensor. | |||||||||
Q1:Are you a trading company or manufacturer?
A: We are manufacturer.
Q2:Can I get sample from you?
A:Yes,we can provide the free samples for your testing,please contact us for free and tell us which product you need.
Q3:Do you accept customization?
A:Yes,customization is acceptable,please contact our sales staffs for consult.
Q4:Can you provide help for technical issues?
A:Yes,we have more than 10 years of research and development in the electronic industry. If you need technical help in the purchase process, please feel free to contact us.
){kind=link}