4.0V Output DC12V Closed Loop Hall Effect Voltage Transducer Sensor

• Customization: Available
• Voltage Type: DC+12.0V
• Measuring Principle: Hall Type
• Model NO.: CHV_AS12S4
• Output Signal Type: Analog Type
• Production Process: Integration
• Material: Plastic
• Accuracy Grade: 0.5G
• IP Rating: IP68
• Certification: RoHS
• Customized: Customized
• Rated Input: 05/10mA
• Output Voltage: +4.0V
• Installation: PCB Mounting
• Free Samples: Available
• Measuring Range: 0~+20mA
• Offset Voltage: @IP=0, T=25c < +40mv
• Power Consumption: 15mA
• Plastic Material: PBT G30/G15, UL94-V0
• Transport Package: Standard Export Carton
• Trademark: Cheemi
• Origin: China(Mainland)
• HS Code: 90330000
• Production Capacity: 10000PCS/Month

Product Description

Advantages

 

* Easy installation 
* Can be customized
* High accuracy 
* Very good linearity
* Optimized response time, no insertion losses
* Low power consumption
* Low temperature drift
* High immunity to external interference     

 

Applications

* Inverter applications
* AC/DC variable-speed drive 
* Uninterruptible Power Supplies (UPS)
* Switched Mode Power Supplies (SMPS)
* Voltage detection of power distribution cabinet 
* Battery power supply measurement
* Variable speed drive system
* Close loop feed-back control system application   

Specification

Electrical data:(Ta=25ºC,Vc= ±15VDC)
Parmeter                                             Ref	CHV200 AC15D25	CHV400 AC15D25	CHV600 AC15D25	CHV800 AC15D25	CHV1000 AC15D25
Rated input voltage  Vpn(V)	200	400	600	800	1000
Measuring range  Vp(V)	0~±280	0~±360	0~±840	0~±1120	0~±1400
Turns ratio Np/NS (T)	1000	1000	1000	1000	1000
Secondary coil resistance RS (ohm)	60	60	60	60	60
Output current rms IS(mA)	±25*VP/VPN
Inside resistance RM (ohm)	[(VC-3.0V)/(IS*0.001)]-RS
Supply voltage  VC(V)	(±12~±15) ±5%
Accuracy  XG(%)	@IPN,T=25°C                                                          < ±0.5
Offset current  IOE(mA)	@IP=0,T=25°C                                                        < ±0.15
Temperature variation of IOE IOT(mA/°C)	@IP=0,-40 ~ +85°C                                                 < ±0.5
Linearity error  εr(%FS)	< 0.2
Response time  tra(µs)	@90% of IPN                                                           <40.0
Power consumption  IC(mA)	15+Is
Insulation voltage  Vd(KV)	@50/60Hz, 1min,AC                                                   2.5

General data:
Operating temperature  TA(°C)	-40 ~ +85
Storage temperature  TS(°C )	-55~ +125
Mass  M(g )	50
Plastic material	PBT G30/G15, UL94- V0;
Standards	IEC60950-1:2001
	EN50178:1998
	SJ20790-2000

Dimensions(mm):
	Connection
	General tolerance
	General tolerance:< ±0.2mm size of Primary pin: 2pin,0.8*0.8±0.15mm; Secondary 4pin:0.65*0.65±0.15mm
Instructions for use of the voltage sensor model CHV10AS12S4: Primary resistance R1: the sensor's optimum accuracy is obtained at the rated current. So R1 should be calculated so that the rated voltage to be measured corresponds to a primary current of 10mA. For example: Measuring rated voltage VPN=250V: R1=25K/2.5W,IP=10mA  Accuracy=±0.5% of VPN;  b) R1=50K/1.25W,IP=05mA  Accuracy=±1.0% of VPN;       Operating range(recommended):taking into the resistance of the primary windings(which must remain low compared to R1.in order to keep thermal deviation as low as possible) and the isolation,the sensor is suitable for measuring nominal voltage from 10 to 500V.

 

Company Profile

Packaging & Shipping

Package 
All our sensors will be well packed with bubble & carton. (Bubble packing→4 small carton→1 big carton)
You can choose your own label(Screen Print or Laser Engraving).
Can be netural packing or OEM.

Shipping
Products are shipped via UPS / DHL/ FedEx / TNT, etc. (door to door), or air & sea shipment for larger qty.
L/T: 3-7 days upon receiving payment if the qty is lower than 1000PCS and it is not customized products.
Shipping via DHL. UPS. FedEx and TNT express usually takes 3~7days dependent on the destination country. 

 

FAQ

Q1:Can I get sample from you?
A:Yes,we can provide the free samples for your testing,please contact us for free and tell us which product you need.
Q2:Do you accept customization?
A:Yes,customization is acceptable,please contact our sales staffs for consult.
Q3:Can you provide help for technical issues?
A:Yes,we have more than 10 years of research and development in the electronic industry. If you need technical help in the purchase process, please feel free to contact us.
Q4 : Can I get a lower price if I order large quantities?
A : Yes,it's negotiable.
Q5: How about the quality guarantee period ?
A : Our warranty period is one year since from shipping date.
Q6: Can I add or delete items from my order if I change mind?
A : Yes, but you need to tell us asap, if your order has been done in our production line, we cannot change it.