| Customization: | Available |
|---|---|
| Type: | Hall Type |
| Output Signal Type: | Analog Output |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Electrical data (Ta=25ºC,Vc= ±15VDC) | |||||||||
| Ref Parameter |
Symbol | CFB600ITN15D400 | Unit | ||||||
| Primary side rated input | I PN DC | ± 600 | A | ||||||
| Primary side rated AC input | I PN | 424 | A | ||||||
| Primary side max input | I PM | 110% IPN DC <IPM<120% IPN DC | A | ||||||
| Turns ratio | N p / N S | 1 : 1500 | T | ||||||
| Output current rms | I S | ± 400 * I P / I PN | mA | ||||||
| Secondary coil resistance | R S | 11 | Ω | ||||||
| Measuring resistance | R M | 0-10 Ω | Ω | ||||||
| Supply voltage | V C | ± 15V (± 5%) | V | ||||||
| Accuracy | X G | @DC , T =25°C <10 ppm | % | ||||||
| Offset current | I OE | @ I P =0 , T =25°C < ±15 ppm | mA | ||||||
| Temperature coefficient of | I OE | @ I P =0 , 10 ~ +50°C < ±0.5 ppm/K | |||||||
| Offset stability | 0.8 ppm/month | ||||||||
| Linearity error | εr | <1.5 ppm | %FS | ||||||
| Di/dt accurately followed | > 100 | A/µs | |||||||
| Response time tra | @90% of I PN < 1.0 | µs | |||||||
| Working status description | |||||||||
| After the equipment is powered on, the green indicator light is always on when the equipment works normally When the current is overloaded or the power supply is abnormal, the green light is off When the green light is not on, you should first check whether the power supply of the sensor is normal. When the power supply is normal, if the green indicator is off, the current sensor is in a non-zero flux state. If the primary current at this time exceeds the specified range of the sensor, the sensor enters the overload operation mode. When this happens, the transducer will shut down the measuring circuit and wait until the primary current is near zero. |
|||||||||
| Interlock port wiring | |||||||||
|
|||||||||
| Dimension | |||||||||
|
1. Output return 2. N.C 3. Interlock(-) 4. GND 5. -15V Supply 6. Output 7. N.C 8. Interlock(+) 9. +15V Supply |
||||||||
|
General tolerance:< ±0.5mm Transducer fastening: - Straight mounting 2 holes ö6.5 mm 2 x M6 steel screws Recommended fastening torque 4.4 Nm - Flat mounting 4 holes 5.5 mm 4 x M5 steel screws Recommended fastening torque 3.7 Nm Connection of secondary on D-SUB-9, Connector UNC 4-40 Primary through hole ö £ 30 mm All mounting recommendations are given for a standard mounting. Screws with flat and spring washers. |
||||||||
Q1:Can I get sample from you?
A:Yes,we can provide the free samples for your testing,please contact us for free and tell us which product you need.
Q2:Do you accept customization?
A:Yes,customization is acceptable,please contact our sales staffs for consult.
Q3:Can you provide help for technical issues?
A:Yes,we have more than 10 years of research and development in the electronic industry. If you need technical help in the purchase process, please feel free to contact us.
Q4 : Can I get a lower price if I order large quantities?
A : Yes,it's negotiable.
Q5: How about the quality guarantee period ?
A : Our warranty period is one year since from shipping date.
Q6: Can I add or delete items from my order if I change mind?
A : Yes, but you need to tell us asap, if your order has been done in our production line, we cannot change it.
){kind=link}