Customization: | Available |
---|---|
Type: | Hall Type |
Output Signal Type: | Analog Output |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Ultimate performance parameters: | ||||||
PARAMETERS | SYMBOL | UNIT | VALUE | CONDITIONS | ||
MIN. | TYP. | MAX. | ||||
Maximum supply voltage | UC | V | -14 | - | 14 | |
Insulation impedance | RIS | MΩ | 500 | - | - | 500V DC-ISO 16750 |
Electrical safety distance | dCI | mm | 3.0 | |||
Creepage distance | dCP | mm | 3.0 | |||
Relative leakage index | CTI | PLC3 | ||||
Maximum output current | IOUT | mA | -10 | - | 10 | Continuous output |
Maximum output voltage (analog) | V | -14 | - | 14 | Output over voltage, 1min@25°C | |
General performance parameters: | ||||||
PARAMETERS | SYMBOL | UNIT | VALUE | CONDITIONS | ||
MIN. | TYP. | MAX. | ||||
Power supply voltage | UC | V | 4.75 | 5 | 5.25 | |
Current consumption | IC | mA | - | 15 | 20 | @TA = 25°C, Uc = 5V |
Output current | IC | mA | -1 | 1 | ||
Load resistance | RL | KΩ | 10 | - | ||
Output impedance | ROUT | Ω | 1 | - | 10 | |
Capacitive load | CL | nF | 1 | - | 100 | |
Working temperature | TA | ºC | -40 | 125 | ||
Performance parameter channel 1: | ||||||
Rated measurement current | IPN | A | - | - | According to model: ± 20... ± 100 |
|
Zero voltage | UO | V | 2.5 | @Uc = 5V | ||
Rated output 1) | Uout | V | Uout = (UC/ 5) × (Uo + S × IP ) | @TA = 25°C | ||
Sensitivity | S | mV/A | - | 2000/IPN | - | @Uc = 5V |
Minimum output clamp voltage | USZ | V | 0.2 | 0.25 | 0.3 | @Uc = 5V |
Maximum output clamp voltage | 4.7 | 4.75 | 4.8 | @Uc = 5V | ||
Proportional error | εr | % | -0.6 | 0.6 | ||
Sensitivity error | εS | % | ±0.4 | @TA = 25°C | ||
±1.0 | @-10°C<TA<65°C | |||||
±1.5 | @-40°C<TA<125°C | |||||
Electronic offset voltage range | UOE | mV | ±10 | @TA = 25°C,Uc=5V | ||
Magnetic offset voltage range | UOM | mV | ±5 | @TA = 25°C,Uc=5V,after ±IP | ||
Linearity error | εL | % | - | ±0.5 | - | @TA = 25°C,Uc=5V |
Zero voltage temperature coefficient | TCUO E AV |
mV/ºC | -0.1 | +0.1 | @-40°C<TA<125°C | |
Output voltage temperature coefficient | TCUO UTAV |
%/ºC | -0.08 | ±0.04 | +0.08 | @-40°C<TA<125°C |
Response time | tr | μs | 4 | 6 | @ 90% of IPN | |
Bandwidth 2) | BW | KHz | 1.1 | @-3dB | ||
Output noise | Uno pp | mV | 15 | |||
Performance parameter channel 2: | ||||||
Rated measurement current | IPN | A | - | - | According to model: ±200 … ±1000 | |
Zero voltage | UO | V | 2.5 | @Uc = 5V | ||
Rated output 1) | Uout | V | Uout = (UC/ 5) × (Uo + S × IP ) | @TA = 25°C | ||
Sensitivity | S | mV/A | - | 2000/IPN | - | @Uc = 5V |
Minimum output clamp voltage | USZ |
V |
0.2 | 0.25 | 0.3 | @Uc = 5V |
Maximum output clamp voltage | 4.7 | 4.75 | 4.8 | @Uc = 5V | ||
Proportional error | εr | % | -0.6 | 0.6 | ||
Sensitivity error | εS |
% | ±0.4 | @TA = 25°C | ||
±0.8 | @-10°C<TA<65°C | |||||
±1.2 | @-40°C<TA<125°C | |||||
Electronic offset voltage range | UOE | mV | ±10 | @TA = 25°C,Uc=5V | ||
Magnetic offset voltage range | UOM | mV | ±5 | @TA = 25°C, Uc=5V, after ±IP | ||
Linearity error | εL | % | - | ±0.5 | - | @TA = 25°C,Uc=5V |
Zero voltage temperature coefficient | TCUO E AV |
mV/ºC | -0.1 | +0.1 | @-40°C<TA<125°C | |
Output voltage temperature coefficient | TCUO UTAV |
%/ºC | -0.08 | ±0.04 | +0.08 | @-40°C<TA<125°C |
Response time | tr | μs | 4 | 6 | @ 90% of IPN | |
Bandwidth 2) | BW | KHz | 1.1 | @-3dB | ||
Output noise | U | mV | 15 |
General data: | |
Parameter | Value |
Operating temperature TA(°C) | -40 ~ +125 |
Storage temperature TS(°C ) | -55~ +125 |
Mass M(g ) | 80 |
Plastic material | PBT+GF30 |
Standards | ISO16750 |
GB/T28046 | |
IEC60068 |
Dimensions(mm): | ||
![]() |
||
Electronic schematic | Bill of Materials | |
![]() |
Plastic shell : PBT+GF30 | |
Magnetic core: Silicon steel sheet winding/amorphous | ||
Connector terminal: Tinned brass | ||
Gross weight: 85g | ||
Mounting recommendation | ||
Connector model TYCO 1-14564265-5 Recommended maximum torque 2.5 N·m |
||
General tolerance | ||
General tolerance:< ±0.5mm |