Type: | Hall Type |
---|---|
Output Signal Type: | Analog Output |
Production Process: | SemiConductor Integrated |
Material: | Mixture |
Accuracy Grade: | 0.5G |
Application: | Motor Controller Measurement of Electric Vehicle |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Electrical dataTa=25ºCVc=+15.0VDC.RL=10KΩ | ||||||
Ref Parmeter |
CHK200EKB15D4 | CHK400EKB15D4 | CHK800EKB15D4 | CHK1000EKBI5D4 | CHK1200EKB15D4 | CHK2000EKB15D4 |
Rated input Ipn(A) | 200 | 400 | 800 | 1000 | 1200 | 2000 |
Measuring range lp(A) | 0±600 | 0±1200 | 0±2000 | 0±3000 | 0±3600 | 0±4000 |
output voltageVo(V) | ±4.0*(IP/PN) | |||||
Load resistance R(KΩ) | >10 | |||||
Supply voltage VC(V) | (±12~+15)±5% | |||||
Accuracy XG(%) | @IPN.T=25°C <±1.0 | |||||
Offset voltage VOE(mV) | @IP=0.T=25°C <±25 | |||||
Temperature variation of VOEVOT(mV/ºC) | @IP=0.-40~+85°C <±1.0 | |||||
Hysteresis offset voltageVOH(mV) | @IP=0.after 1*IPN <±25 | |||||
Linearity error εr(%FS) | < 1.0 | |||||
Di/dt accurately followed A/μs |
>100 | |||||
Response time tra(μs) | @90% of IPN <5.0 | |||||
Power consumption IC(mA) | 15 | |||||
Bandwidth Bw(KHZ) | (@-3dB.IPN DC-20 | |||||
Insulation voltagc Vd(KV) | @50/60Hz.1min.AC 3.0 | |||||
General data | ||||||
Parameter | Value | |||||
Operating temperatureTA(°C) | -40~+85 | |||||
Storage temperature TS(°C) | -55~+125 | |||||
Mass M(g) | 120 | |||||
Plastic material | PBT G30/G15.UL94- VO; | |||||
Standards | IEC60950-1:2001 | |||||
EN50178:1998 | ||||||
SJ20790-2000 | ||||||
Dimensions(mm) | ||||||
Remarks | ||||||
When the current goes through the primary pin of a sensor, the voltage will be measured at the output end. Custom design is available for the diferent rated input current and the output voltage. The dynamic performance is the best when the primary hole if fully filled with. The primary conductor should be <100°C. |
||||||
WARNING :Incorrect wiring may cause damage to the sensor. |
Suppliers with verified business licenses