Type: | Hall Type |
---|---|
Output Signal Type: | Analog Output |
Production Process: | SemiConductor Integrated |
Material: | Plastic |
Accuracy Grade: | 0.5G |
Application: | DC Panel, UPS, Charging Equipment |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
* Easy installation
Electrical data:(Ta=25ºC,Vc= ±15VDC) | |||||
Parmeter Ref |
CHB50 LAP15D50 |
CHB100 LAP15D50 | CHB125 LAP15D125 |
CHB200 LAP15D100 |
CHB300 LAP15D150 |
Rated input Ipn(A) | 50 | 100 | 125 | 200 | 300 |
Measuring range Ip(A) | 0~±150 | 0~±300 | 0~±375 | 0~±600 | 0~±600 |
Turns ratio Np/NS (T) | 1:1000 | 1:2000 | 1:1000 | 1:2000 | 1:2000 |
Output current rms IS(mA) | ±50*IP/IPN | ±50*IP/IPN | ±125*IP/IPN | ±100*IP/IPN | ±150*IP/IPN |
Secondary coil resistance RS (ohm) | 30 | 50 | 30 | 50 | 50 |
Inside resistance RM (ohm) | [(VC-0.6V)/(IS*0.001)]-RS | ||||
Supply voltage VC(V) | (±9~±15) ±5% | ||||
Accuracy XG(%) | @IPN,T=25°C < ±0.5 | ||||
Offset current IOE(mA) | @IP=0,T=25°C < ±0.2 | ||||
Temperature variation of IOE IOT(mA/°C) | @IP=0,-40 ~ +85°C < ±0.005 |
||||
Linearity error εr(%FS) | < 0.1 | ||||
Di/dt accurately followed(A/µs) | > 100 | ||||
Response time tra(µs) | @90% of IPN < 1.0 | ||||
Power consumption IC(mA) | 15+Is | ||||
Bandwidth BW(KHZ) | @-3dB,IPN DC-200 | ||||
Insulation voltage Vd(KV) | @50/60Hz, 1min,AC 3.0 |
General data: | |
Parameter | Value |
Operating temperature TA(°C) | -40 ~ +85 |
Storage temperature TS(°C ) | -55~ +125 |
Mass M(g ) | 21 |
Plastic material | PBT G30/G15, UL94- V0; |
Standards | IEC60950-1:2001 |
EN50178:1998 | |
SJ20790-2000 |
Dimensions(mm): | |
Connection | |
General tolerance | |
General tolerance:< ±0.5mm Primary through-hole:10.5*16.2±0.15mm Secondary pin: 3pin 0.6*0.65 |
Suppliers with verified business licenses